AIC

Product
  • TB116-AL

    Features & Benefits
    1U Aquila NEBS/Telco Ready Server with 3 x easy-swap fans and redundant power supply, supports Quad Core processor. TB116-AL harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.
    Product Image

    Features & Benefits
    • 1U NEBS compliant network appliance platform with 5+ years life cycle
    • Intel® 3420 chipset to support one Intel® Xeon® Processor 3400 series
    • Flexible I/O usage with Max I/O™ to support up to 3 COTS PCIe Gen2 cards
    • Front-to-back airflow and easy-swap redundant fan design provide optimal thermal conditions
    • Customizable to meet your requirements
    • 2 x server Class GbE ports
    • Onboard Baseboard Management Controller for system management and IPMI control

     

    Dimensions
    Dimensions
    (W x D x H)
    mm : 485.1 x 541.7 x 44
    inches : 19 x 21 x 1.7
    Motherboard
    Motherboard Aquila (PSG-M-ALUPIBPK-XXX)
    Processor
    Processor Support One Intel® Xeon® Processor 3400 Series, Previous Generation Intel® Core™ i3 Processor,
    Intel® Pentium® Processor G6950 or Intel® Celeron® Processor G1101
    System Bus 1066/1333 MHz
    Socket Type FCLGA1156 (Socket H)
    Chipset Support
    Chipset Support Intel® 3420 chipset
    System Memory
    System Memory • 6 x DIMM slots support DDR3 800/1066/1333 MHz
    Registered ECC (recommended) or Unbuffered ECC SDRAM
    • Up to 16GB DDR3 support with RDIMM (6) for Lynnfield processor
    • Up to 8GB DDR3 support with UDIMM (4) for Clarkdale processor
    Front Panel

    Buttons

    • Power on/off
    • System reset
    • System ID
    • 1 x USB

    LEDs

    • Power
    • System ID
    • Hard drive activity
    • System management alert
    • Network activity
    Drive Bays
    Drive Bays 2 x 2.5" hot-swap SATA/SAS/SSD HDD bays
    Expansion Slots
    Expansion Slots 2 x PCIe x8 (full-length, full-height)
    Riser Card (included)
    PSG-RC-AR1U-20-XXX
    (PSG Code: PE1U03)
    1U Gold finger PCIe x 16 to 2 PCIe x 8 riser for Aquila
    SATA/SAS Backplane
    SATA/SAS BP 1 x SAS/SATA 6G 2-in-1 backplane
    System BIOS
    BIOS Type • AMI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface

    BIOS Features

    • ACPI 1.0/2.0/3.0
    • PXE 2.0
    • WOL
    • AC loss recovery
    • IPMI KCS interface
    • SMBIOS 2.0
    • Serial console redirection
    • USB legacy boot
    On-board Devices
    SATA Built-in SATA2 controller with RAID support

    IPMI

    Aspeed AST2050 Mainstream PCI Graphics and Remote Management Processor
    • Baseboard Management Controller (BMC)
    • Intelligent Platform Management Interface 2.0 (IPMI 2.0)
    • iKVM, Media re-direction, IPMI over LAN, Serial over LAN
    • SMASH support
    Network Controllers • Intel® 82574L Gigabit Ethernet Controller, single port, PCIe
    • Intel® 82578DM Gigabit Ethernet PHY, single port, 1 Gbps

    Graphics

    Aspeed AST2050 Mainstream PCI Graphics
    and Remote Management Processor
    • 2D video graphics adapter with PCI bus interface
    • 8MB of system memory
    • 1600x1200 @ 60Hz
    Super I/O Winbond W83627DHG
    Rear I/O
    LAN 2 x RJ45 ports
    USB 2 x USB ports
    VGA 1 x external VGA port
    Serial Port 1 x external DB-9 serial port
    Power Supply

    Power Supply

    450W 1+1 redundant high efficiency 80+ power supply unit
    • 90-264VAC, 47-63Hz
    System Cooling
    System Cooling 3 x 40x56mm easy-swap redundant fans
    System Management
    System Management • IPMI 2.0 compliance
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • CPU temperature (PECI)
    • System temperature
    • Fan speed detection
    • Smart fan speed control
    • System ID / System fail indicator
    • SMASH support
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    Operating Environment
    Environmental Specifications • Operating temp: 0 – 40°C
    • Operating altitude condition: 0 – 10K feet
    • Storage temp: -20°C – 60°C
    • System relative humidity: 5% to 95% (38°C) non-condensing
    Gross Weight
    Gross Weight 4.5 kgs / 10 lbs (w/ PSU & Rail)
    Packaging Dimension
    Packaging Dimension
    (W x D x H)
    mm: 805 x 590 x 274
    Cubic Feet
    Cubic Feet 6
    Reference Container Loading
    20' 160
    40' 325
    40'H 390

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H