AIC

Product
  • SB402-LB

    Features & Benefits
    SB402-LB is a 4U 36-bay storage server solution with 24 bays in the front and 12 in the rear. It comes with AIC’s E-ATX server board, Libra, which supports dual Intel® Xeon® processor E5-2600 v3 and v4 product family and 6 x PCIe 3.0 slots.
    Product Image

    Key Features
    • 4U 36-Bay storage server
    • Supports two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    • With Intel® C612 Series Chipset to provide 5+ years product life cycle
    • 6 x PCIe 3.0 slots
    • Onboard Baseboard Management Controller for system management and IPMI control
    • Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
    • Two 10 GbE RJ45 ports

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 483 x 679 x 173.5
    • inches : 19 x 26.7 x 6.8
    Motherboard
    AIC Server Board Libra
    Processor
    Processor Support : Two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    QPI Speeds : 9.6 GT/s, 8 GT/s, 7.2 GT/s
    Socket Type : Socket R3 (FCLGA2011-3)
    Chipset
    Intel® C612 Chipset
    System Memory
    • 16 DIMM slots across 8 memory channels
    (4 memory channels per CPU; 2DPC)
    - 512GB DDR4 2133/1866 RDIMM DRx4
    - 128GB DDR4 2133/1866 RDIMM SRx4
    - 1024GB DDR4 2133/1866 LRDIMM QRx4
    - 2048GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
    Front Panel
    • Power on/off
    • System reset
    • 2 x USB 3.0 Type A connectors
    LEDs
    • Power
    • Alert
    • LAN
    • Drive
    Drive Bays
    External : 36 x 3.5” hot swap & 2 x 2.5" hot swap
    Backplane
    Options :
    1 x 24 port 12Gb SAS backplane with 36-PHY expander and 3 SFF-8643 connectors
    Expansion Slots (PCIe 3.0)
    2 x16 + 1 x16 (x8 mode) + 3 x8 (all LP)
    System BIOS
    BIOS Type :
    • Insyde UEFI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface
    BIOS Features :
    • ACPI
    • PXE
    • WOL
    • AC loss recovery
    • IPMI 2.0 KCS interface
    • SMBIOS
    • Serial console redirection
    • BIOS Boot Specification
    • BIOS Recovery Mode
    • SRIOV
    • iSCSI
    • TPM
    • PCIe NTB
    On-board Devices
    SATA :
    Built-in SATA controller with RAID support on Intel® C612 Chipset
    8x 7pin SATA connectors
    1x M.2 with SATA/PCIe X2 support
    IPMI :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • Baseboard Management Controller
    • Intelligent Platform Interface 2.0 (IPMI 2.0)
    • iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    • SMASH Support
    Network Controller :
    • Intel® Ethernet Controller X540-BT2 dual port 10 GbE, 10GBASE-T, PCIe v2.1, x8 [Or Intel® Ethernet Controller I350-AM2, dual port GbE, PCIe v2.0 (co-lay with Intel® X540-BT2). MOQ required.]
    • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
    • Intel® Ethernet Network Connection I217-LM, single port GbE, 1Gbps
    • Realtek® RTL8201EL single port 10/100 Mbps Ethernet PHYceiver for dedicated BMC port
    Graphics :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • PCIe VGA/2D Controller
    • 1920x1200@60Hz 32bpp
    Rear I/O
    • 2 x RJ45
    • 1 x RJ45 (dedicated BMC port)
    • 2 x RJ45 cabled from two internal 2x5 box pin-header (optional accessory)
    • 2 x USB 3.0 Type A
    • 1 x VGA
    • 1 x Serial
    Power Supply
    1200W 1+1 redundant PSU 80+ Platinum
    • 100-240VAC, 47-63 Hz
    System Cooling
    Middle : 3 x 80x38 PWM hot swap fans
    System Management
    • IPMI 2.0
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • System temperature
    • System ID / System fail indicator
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    • Intel NM
    Environmental Specifications
    • Operating temperature : 0° - 35°C
    • Operating altitude condition : 0 ~ 10K feet
    • Storage temperature : -20° ~ 60°C
    • System relative humidity : 5% - 95% (38°C) non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 40.4
    • lbs : 89
    Packaging Dimensions (W x D x H)
    • mm : 610 x 920 x 380
    • inches : 24 x 36.2 x 15
    Mounting
    Standard : 26" tool-less slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H