AIC

Product
  • SB212-PH

    Features & Benefits
    SB212-PH is a 2U 12-bay server solution for general purposes. It supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB212-PH has 12 x 3.5” drive bays in the front for storage and 2 x 2.5” in the rear for OS drives. Depending on the I/O bandwidth you need for your application, you can opt for either a 12Gb/s SAS backplane with expander chip on board or one without. SB212-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf up to 8x PCIe expansion cards in the system.
    Product Image

    Key Features
    • 2U 12-Bay 3.5” HDD/SSD bay storage server
    • Supports two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    • With Intel® C612 Series Chipset to provide 5+ years product life cycle
    • Highly dense I/O design with MAX I/O™ technology, utilizing 64 lanes of PCIe 3.0 to support up to 8 COTS PCIe add-in cards
    • Onboard Baseboard Management Controller for system management and IPMI control
    • Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
    • Two 10 GbE SFP+ ports

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 482.6 x 750 x 88
    • inches : 19 x 29.5 x 3.5
    Motherboard
    AIC Server Board Phoenix
    Processor
    Processor Support : Two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    QPI Speeds : 9.6 GT/s, 8 GT/s, 7.2 GT/s
    Socket Type : Socket R3 (FCLGA2011-3)
    Chipset
    Intel® C612 Chipset
    System Memory
    • 12 DIMM slots across 8 memory channels
    (4 memory channels per CPU; 2 channels with 2DPC and 2 channels with 1DPC)
    - 384GB DDR4 2133/1866 RDIMM DRx4
    - 96GB DDR4 2133/1866 RDIMM SRx4
    - 768GB DDR4 2133/1866 LRDIMM QRx4
    - 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
    Front Panel
    • Power on/off
    • System ID
    • System reset
    LEDs
    • Power
    • System ID
    • Alert
    Drive Bays
    External : 12 x 3.5” hot swap & 2 x 2.5” hot swap
    Backplane
    Options :
    • 1 x 12-port 12Gb SAS backplane with 28-PHY expander chip and 3 SFF-8643 connectors
    • 1 x 12-port 12Gb SAS backplane with 3 SFF-8643 connectors
    Expansion Slots (PCIe 3.0)
    Config 1 : 2 x16 + 4 x8
    (2 external and 2 internal)
    Config 2 : 8 x8 (6 external and 2 internal)
    Config 3 : 6 x8 (external) + 2 NVMe U.2

    (Or other combinations utilizing up to 64 lanes and fewer than 8 slots)
    Riser Card (included)
    • PSG-RC-TO2U-80-110 (PSG Code: PE2U20) :
    Gold-finger PCIe Gen3 x16 to 8 PCIe Gen3 x8 riser
    System BIOS
    BIOS Type :
    • Insyde UEFI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface
    BIOS Features :
    • ACPI
    • PXE
    • WOL
    • AC loss recovery
    • IPMI 2.0 KCS interface
    • SMBIOS
    • Serial console redirection
    • BIOS Boot Specification
    • BIOS Recovery Mode
    • SRIOV
    • PCIe Hotplug
    • iSCSI
    • TPM
    • PCIe NTB
    On-board Devices
    SATA :
    Built-in SATA controller on Intel® C612 Chipset with software RAID support
    IPMI :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • Baseboard Management Controller
    • Intelligent Platform Interface 2.0 (IPMI 2.0)
    • iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    • SMASH Support
    Network Controller :
    • Intel® 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s optional)
    • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
    • Intel® Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
    Graphics :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • PCIe VGA/2D Controller
    • 1920x1200@60Hz 32bpp
    Rear I/O
    • 2 x 10 GbE SFP+
    • 2 x RJ45
    • 2 x USB 3.0 Type A
    • 1 x VGA
    • 1 x Serial
    Power Supply
    AC 800W 1+1 redundant high-efficiency power supply 80+
    • 90-264VAC, 47-63 Hz
    System Cooling
    4 x 80x38mm easy swap fans
    System Management
    • IPMI 2.0
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • System temperature
    • System ID / System fail indicator
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    • Intel NM
    Environmental Specifications
    • Operating temperature : 0° - 35°C
    • System relative humidity : 5% - 95% non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 31.5
    • lbs : 69.3
    Packaging Dimensions (W x D x H)
    • mm : 591 x 973 x 318
    • inches : 23.3 x 38.3 x 12.5
    Mounting
    Standard : 28" tool-less slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H