AIC

Product
  • SB122-PH

    Features & Benefits
    SB122-PH, a 1U 10-Bay NVMe Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB122-PH has 8 x 2.5” PCIe SSD (front) + 2 x 2.5” (front) hard drive bays to provide a highly dense, hybrid storage solution. SB122-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.
    Product Image

    Key Features
    • 1U 10-Bay storage server supports PCIe SSD 2.5” FF drives (NVMe) and SATA/SAS/SSD 2.5” drives to provide a highly dense, hybrid storage solution
    • Supports two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    • With Intel® C612 Series Chipset to provide 5+ years product life cycle
    • Flexible IO usage with Max IO™ to support up to 2 COTS PCIe 3.0 cards
    • Onboard Baseboard Management Controller for system management and IPMI control
    • Two 10 GbE SFP+ ports
    • Front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions
    • Customizable to meet your requirements

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 482.6 x 787.4 x 44.4
    • inches : 19 x 31 x 1.75
    Motherboard
    AIC Server Board Phoenix
    Processor
    Processor Support : Two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    QPI Speeds : 9.6 GT/s, 8.0 GT/s, 7.2 GT/s
    Socket Type : Socket R3 (FCLGA2011-3)
    Chipset
    Intel® C612 Chipset
    System Memory
    • 12 DIMM slots across 8 memory channels (4 memory channels per CPU; 2 channels with 2DPC and 2 channels with 1DPC)
    - 384GB DDR4 2133/1866 RDIMM DRx4
    - 96GB DDR4 2133/1866 RDIMM SRx4
    - 768GB DDR4 2133/1866 LRDIMM QRx4
    - 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
    Front Panel
    • Power on/off
    • System ID
    • System reset
    • USB 2.0 Type A connector
    LEDs
    • Power
    • System ID
    • Alert
    Drive Bays
    External : 10 x 2.5” hot swap (8 for PCIe SSDs)
    Backplane
    • 4 x 2-port PCIe backplanes with dual SFF-8643 connectors on each
    • 1 x 2-port 6Gb SAS/SATA backplane with dual SATA connectors
    Expansion Slots (PCIe 3.0)
    2 x8
    Riser Card (included)
    • PSG-RC-AR1U-20-XXX (PSG Code: PE1U03) :
    1U PCIe Gold-finger to 1 x PCIe x16 + 2 x PCIe x8 (External)
    • PSG-RC-TO1U-28-110 (PSG Code: PEMS02) :
    PCIe to SFF8643 for front PCIe SSD backplane connection
    System BIOS
    BIOS Type :
    • Insyde UEFI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface
    BIOS Features :
    • ACPI
    • PXE
    • WOL
    • AC loss recovery
    • IPMI 2.0 KCS interface
    • SMBIOS
    • Serial console redirection
    • BIOS Boot Specification
    • BIOS Recovery Mode
    • SRIOV
    • PCIe Hotplug
    • iSCSI
    • TPM
    • PCIe NTB
    On-board Devices
    SATA :
    Built-in SATA RAID controller on Intel® C612 Chipset with software RAID support
    IPMI :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • Baseboard Management Controller
    • Intelligent Platform Interface 2.0 (IPMI 2.0)
    • iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    • SMASH Support
    Network Controller :
    • Intel® 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s)
    • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
    • Intel® Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
    Graphics :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • PCIe VGA/2D Controller
    • 1920x1200@60Hz 32bpp
    Rear I/O
    • 2 x 10 GbE SFP+
    • 2 x RJ45
    • 2 x USB 3.0 Type A
    • 1 x VGA
    • 1 x Serial
    Power Supply
    AC 650W 1+1 redundant high-efficiency power supply 80+
    • 90-264VAC, 47-63 Hz
    System Cooling
    6 x 40x56mm 21500/18000 rpm hot swap fan modules
    System Management
    • IPMI 2.0
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • System temperature
    • System ID / System fail indicator
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    • Intel NM
    Environmental Specifications
    • Operating temperature : 0° - 35°C
    • Operating altitude condition : 0 ~ 10K feet
    • Storage temperature : -20° ~ 60°C
    • System relative humidity : 5% - 95% (38°C) non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 24
    • lbs : 53
    Packaging Dimensions (W x D x H)
    • mm : 590 x 1130 x 273
    • inches : 23.2 x 44.5 x 10.7
    Mounting
    Standard : 28" tool-less slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H