AIC

Product
  • HA401-LB2

    Features & Benefits
    HA401-LB2 is a 4U 24-Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration and supports 12Gbs SAS. It comes with two AIC Server Boards (one board per node), each supporting dual Intel® Xeon® processors in the E5-2600 v3 and v4 product family. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA401-LB2 eliminates SPOFs (single point of failures). It is optimized for mission-critical, enterprise-level storage applications.
    Product Image

    Key Features
    • High-availability storage server optimized for mission-critical, enterprise-level storage applications
    • Fully redundant, fault-tolerant system supporting hot swappable compute nodes and storage drives
    • Two compute nodes, Active-Active configuration, each supporting two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    • 10 GbE, PCIe NTB or SAS link between nodes for communication and fail-over
    • Built-in Broadcom SAS3x48R SAS/SATA expander per node
    • Intel® Trusted Platform Module (TPM) header to support Intel® Trusted Execution Technology (TXT)
    • 6 PCIe 3.0 slots

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 482.6 x 698.5 x 177.8
    • inches : 19 x 27.5 x 7
    Motherboard (per node)
    AIC Server Board Libra
    Processor (per node)
    Processor Support : Two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    Supported QPI : 9.6 GT/s, 8 GT/s, 7.2 GT/s
    Socket Type : Socket R3 (FCLGA2011-3)
    Chipset Support (per node)
    Intel® C612 Chipset
    System Memory (per node)
    • 16 DIMM slots across 8 memory channels
    (4 memory channels per CPU; 2DPC)
    - 512GB DDR4 2133/1866 RDIMM DRx4
    - 128GB DDR4 2133/1866 RDIMM SRx4
    - 1024GB DDR4 2133/1866 LRDIMM QRx4
    - 2048GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
    Front Panel
    System power on
    LEDs
    A :
    • Power (Secondary)
    • Warning
    B :
    • Power (Primary)
    • Warning
    Drive Bays
    External : 24 x 3.5" hot swap
    Backplane
    1 x 24-port 12Gb SAS backplane
    Expander Board (per node)
    1 x 48-port 12Gb SAS expander board
    Expansion Slots (PCIe 3.0) (per node)
    2 x16 +1 x16 (x8 mode) + 3 x8 (all Low-Profile)
    System BIOS
    BIOS Type :
    • Insyde UEFI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface
    BIOS Features :
    • ACPI
    • PXE
    • WOL
    • AC loss recovery
    • IPMI 2.0 KCS interface
    • SMBIOS
    • Serial console redirection
    • BIOS Boot Specification
    • BIOS Recovery Mode
    • SRIOV
    • iSCSI
    • TPM
    • PCIe NTB
    On-board Devices
    SATA :
    Built-in SATA controller with RAID support on Intel® C612 Chipset
    • 8x 7pin SATA connectors
    • 1x M.2 with SATA/PCIe X2 support
    IPMI :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • Baseboard Management Controller
    • Intelligent Platform Interface 2.0 (IPMI 2.0)
    • iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    • SMASH Support
    Network Controllers :
    • Intel® Ethernet Controller X540-BT2 dual port 10 GbE, 10GBASE-T, PCIe v2.1, x8 [Or Intel® Ethernet Controller I350-AM2, dual port GbE, PCIe v2.0 (co-lay with Intel® X540-BT2). MOQ required.]
    • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
    • Intel® Ethernet Network Connection I217-LM, single port GbE, 1Gbps
    • Realtek® RTL8201EL single port 10/100 Mbps Ethernet PHYceiver for dedicated BMC port
    Graphics :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • PCIe VGA/2D Controller
    • 1920x1200@60Hz 32bpp
    Rear I/O (per node)
    • 2 x SAS SFF8644
    • 3 x RJ45 (1 for BMC)
    • 2 x USB 3.0
    • 1 x VGA 
    • 1 x Serial
    • optional 2 x RJ45
    Power Supply
    1200W 1+1 redundant power supply 80+
    • 100-240VAC, 47-63 Hz
    System Cooling (per node)
    4 x 60x56mm hot swap fans
    System Management
    • IPMI 2.0
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • System temperature
    • System ID / System fail indicator
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    • Intel NM
    Environmental Specifications
    • Operating temperature : 0° - 35°C
    • System relative humidity : 5% - 95% non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 47
    • lbs : 104
    Packaging Dimensions (W x D x H)
    • mm : 660 x 970 x 420
    • inches : 26 x 38.2 x 16.6
    Mounting
    Standard : 28" slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H