AIC

Product
  • HA401-CP2

    Features & Benefits
    HA401-CP2, a 4U High-availability Storage Server Solution that leverages SBB (Storage Bridge Bay) standards with the use of COTS components. It comes with Intel® Server Board which supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has fully redundant, hot-swappable controller canisters, 10GbE interconnection between controllers for fail-over, 24 x 3.5” hot swap drive bays and 6 x PCIe Gen3 slots per controller.
    Product Image

    Key Features
    • High-availability storage server optimized for mission-critical, enterprise-level storage applications
    • Fully redundant, fault-tolerant system supporting hot swappable controller canisters
    • Dual server board controller canisters, each supporting two Intel® Xeon® Processors E5-2600/E5-2600 v2 Product Family and up to 512 GB of memory
    • 10 GbE, PCIe NTB or SAS link between nodes for communication and fail-over
    • Built-in dual LSI SAS2x36 SAS expander
    • Intel® Trusted Platform Module (TPM) header to support Intel® Trusted Execution Technology (TXT)
    • 5 PCIe 3.0 slots

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 482.6 x 698.5 x 177.8
    • inches : 19 x 27.5 x 7
    Motherboard (per node)
    Intel® Server Board S2600CP2
    Processor (per node)
    Processor Support : Two Intel® Xeon® Processors E5-2600/E5-2600 v2 Product Family
    QPI Speeds : 8 GT/s, 7.2 GT/s, 6.4 GT/s
    Socket Type : Socket R (FCLGA2011)
    Chipset (per node)
    Intel® C602 Chipset
    System Memory (per node)
    • 8 memory channels (4 channels for each processor socket)
    • Channels A, B, C, D, E, F, G, and H
    • Support for 800/1066/1333/1600/1866 MHz/s Registered DDR3 Memory (RDIMM), Unbuffered DDR3 Memory (UDIMM) and Load Reduced DDR3 Memory (LRDIMM).
    • DDR3 standard I/O voltage of 1.5V & DDR3 Low Voltage of 1.35V
    Front Panel
    Power on/off
    LEDs
    A :
    • Power (Secondary)
    • Warning
    B :
    • Power (Primary)
    • Warning
    Drive Bays
    External : 24 x 3.5" hot swap 
    (LSI interposer board required when using SATA drives)
    Backplane
    1 x 24-port 6Gb SAS dual-loop backplane
    Expander Board (per node)
    1 x 36-port 6Gbs SAS expander board with 2 SFF-8087 connectors
    Expansion Slots (PCIe 3.0) (per node)
    • Config 1 : 5 x8 (All LP)
    • Config 2 : 5 x8 (3 LP & 2 FHHL)
    Internal I/O Connectors/Headers
    ▪ 1 x 2x5 pin connector providing front panel support for 2 x USB ports
    ▪ 1 x internal Type A USB2.0 port
    ▪ 1 x internal USB port to support low profile eUSB SSD
    ▪ 1 x DH-10 serial Port B connector
    ▪ 1 x 1x7pin header for optional Intel® Local Control Panel support
    Rear Panel (per node)
    • 2 x RJ45
    • 2 x USB 2.0 Type A Connector
    • 1 x VGA
    • 1x Mini SAS
    Video Support (per node)
    Integrated Matrox G200 2D Graphics controller LAN 2 x Gigabit network through Intel® I350 10/100/1000 Mb integrated MAC and PHY controller
    Server Management
    • Onboard Server Engines* LLC Pilot III* Controller
    • Support for Intel® Remote Management Module 4 solutions
    • Intel® Light-Guided Diagnostics on field replaceable units
    • Support for Intel® System Management Software
    Support for Intel® Intelligent Power Node Manager
    (Need PMBus - compliant power supply)
    BIOS Flash Winbond W25Q64BV
    Power Supply
    1200W 1+1 redundant power supply 80+
    • 100-240VAC, 47-63 Hz
    System Cooling (per node)
    4 x 60x51mm hot swap fans
    Environmental Specifications
    • Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
    • Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
    • Humidity : 5%~95% non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 47
    • lbs : 104
    Packaging Dimensions (W x D x H)
    • mm : 660 x 940 x 420
    • inches : 26 x 37 x 16.5
    Mounting
    Standard : 26” slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H