AIC

Product
  • HA202-PH

    Features & Benefits
    HA202-PH is a 2U 24-Bay NVMe storage server solution that provides high-availability with accelerated performance. The HA202-PH supports 24 dual-port U.2 NVMe PCIe SSDs. It comes with two AIC Phoenix Server Boards (one board per node), each supporting dual Intel® Xeon® Processors E5-2600 v3 or v4 product families. Both nodes process I/O, and provide simultaneous and balanced access to the logical devices, which significantly increases overall cluster performance. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. By eliminating SPOFs (single points of failure) and designed for redundancy and end-to-end data protection, the HA202-PH provides protection from storage system down time and loss of revenue when access to data resources and critical business applications are uninterruptible. Its support of NVMe SSDs allows for super-fast data access, and is optimized for mission-critical, enterprise-level storage applications.
    Product Image

    Key Features
    • 24 hot swap bays for dual-port NVMe SSDs (U.2)
    • High-availability storage server optimized for mission-critical, enterprise-level storage applications
    • Fully redundant, fault-tolerant system supporting hot swappable controller nodes and storage drives
    • Two compute nodes, Active-Active configuration, each supporting two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    • 2 PCIe x16 slots per node provide direct links to CPU
    • Reserves 10 GbE, PCIe NTB or SAS link between nodes for communication and fail-over
    • Includes IPMI 2.0 & iKVM

     

    Dimensions (W x D x H) (with chassis ears)
    • mm : 482.6 x 815 x 88
    • inches : 19 x 32 x 3.5
    Motherboard (per node)
    AIC Server Board Phoenix
    Processor (per node)
    Processor Support : Two Intel® Xeon® Processors E5-2600 v3 and v4 product family
    QPI Speeds : 9.6 GT/s, 8 GT/s, 7.2 GT/s
    Socket Type : Socket R3 (FCLGA2011-3)
    Chipset (per node)
    Intel® C612 Chipset
    System Memory (per node)
    • 12 DIMM slots across 8 memory channels
    (4 memory channels per CPU;
    2 channels with 2DPC and 2 channels with 1DPC)
    - 384GB DDR4 2133/1866 RDIMM DRx4
    - 96GB DDR4 2133/1866 RDIMM SRx4
    - 768GB DDR4 2133/1866 LRDIMM QRx4
    - 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4
    Front Panel
    Power on/off
    LEDs
    A :
    • Power (Secondary)
    • Warning
    B :
    • Power (Primary)
    • Warning
    Drive Bays
    External : 24 x 2.5” hot swap PCIe SSDs
    Internal : 2 x 2.5" per node
    Backplane
    1 x 24-port NVMe backplane with dual loop
    Expansion Slots (PCIe 3.0) (per node)
    2 x16 (direct links to CPU)
    Riser Card (included) (per node)
    • PSG-RC-HA2U-24-101 :
    2 PCIe x16
    Expander Board (per node)
    1 x 24-port (48 lanes PCI Express) NVMe expander board
    System BIOS
    BIOS Type :
    • Insyde UEFI BIOS
    • SPI (Serial Peripheral Interface) FLASH Interface
    BIOS Features :
    • ACPI
    • PXE
    • WOL
    • AC loss recovery
    • IPMI 2.0 KCS interface
    • SMBIOS
    • Serial console redirection
    • BIOS Boot Specification
    • BIOS Recovery Mode
    • SRIOV
    • PCIe Hotplug
    • iSCSI
    • TPM
    On-board Devices
    SATA :
    Built-in SATA RAID controller on Intel® C612 Chipset with software RAID support 6x 7pin SATA connectors
    IPMI :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • Baseboard Management Controller
    • Intelligent Platform Interface 2.0 (IPMI 2.0)
    • iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    • SMASH Support
    Network Controller :
    • Intel® 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s)
    • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
    • Intel® Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
    Graphics :
    Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
    • PCIe VGA/2D Controller
    • 1920x1200@60Hz 32bpp
    Rear I/O (per node)
    • 2 x 10 GbE SFP+
    • 2 x RJ45
    • 2 x USB 3.0 Type A
    • 1 x VGA
    • 1 x Serial
    Power Supply
    AC 1200W 1+1 redundant high-efficiency power supply 80+
    • 90-264VAC, 47-63 Hz
    System Cooling (per node)
    2 x 60x56mm fan modules
    System Management
    • IPMI 2.0
    • KVM over IP
    • Media redirection
    • Temperature, fan, voltage, PSU sensor monitor
    • System temperature
    • System ID / System fail indicator
    • Remote power on/off/reset
    • SEL message alarm through mail
    • SNMP support
    • Intel NM
    Environmental Specifications
    • Operating temperature : 0° - 35°C
    • Operating altitude condition : 0 ~ 10K feet
    • Storage temperature : -20° ~ 60°C
    • System relative humidity : 5% - 95% (38°C) non-condensing
    Gross Weight (w/PSU & Rail)
    • kgs : 41
    • lbs : 90
    Packaging Dimensions (W x D x H)
    • mm : 590 x 1150 x 330
    • inches : 23.2 x 45.3 x 13
    Mounting
    Standard : 28" tool-less slide rail

    * All specifications are subject to change without notice.

    Built-to-order(BTO):
    Order Information:
    Industry Standard:
    Materials:
    Finish:
    Inside / Body:
    Outsize / Front:
    Dimensions:
    (W x D x H)
    mm: 0 x 0 x 0
    inches: " x " x "
    Cooling:
    Front:
    Middle:
    Rear:
    Expansion:
    Controls:
    Indicators:
    Speakers:
    System Board:
    Drive Bay:
    External
    5.25"
    3.5"
    3.5" hot-swap
    2.5" hot-swap
    Internal
    3.5"
    2.5"
    Slim CD-Rom/DVD-Rom
    Slim FDD
    Temperature:
    Humidity:
    Gross Weight:
    Package Dimension(W x D x H):   mm: x x
    Cubic Feet:
    Expander:
    Reference Container Loading: 20'
    40'
    40' H